Furnace Repair & Troubleshooting Tips

Share Button

Heaters typically operate, basically difficulty free for a while. To work successfully they should be frequently maintained. If you are having trouble with your heater, here’s a number of points to be checked out. In this write-up I am going to mention many things that are applicable to lots of furnace types.

There are 3 subsystems that run together to provide air to your living area. They are the heating/cooling source itself, the air distribution system and the command or thermostat.

The initial point to check is at the heater, does the system have power? Does it have gas. If fuel is getting to the heater, is the ignition system functioning? If you have actually narrowed down that the heater is creating heat or the ac unit is creating cool, but you still aren’t getting air to the living area, you have to check the air distribution system. Is the fan working? Are the vents open? Is the filter plugged? The third point to check is the thermostat.

Checking out a malfunctioning furnace is a detailed procedure of dismissing what is working and narrowing down the issue. It takes diligence and a certain amount of capability. If you aren’t knowledgeable in this, acquire someone who is.

Prior to you deciding to get friendly with your heating system, check out the following:.

Inspect the power: Is power reaching the device? Is a circuit breaker snapped or a fuse blown? Is the power switch to the unit shut off?

Check for a reset button, give the unit 30 mins to cool off and them push the reset switch. If it doesn’t operate, try once again later on.

If the device is fuel driven, inspect that the gas is getting to the device. If the heating system burns oil, is there oil in the tank?

Attempt decreasing or raising the temperature level on the thermostat. See if that will induce the heating unit to run.

There are a number of protection variables to bear in mind:.

Before you work on a heater, make sure the electric supply to the device is shut off.

If you have a gas furnace and you smell gas in the heating unit location, vacate the location and call the gas company or the fire department. Do not remain in a location where you are breathing fuel.

Have a professional tackle your system. He will certainly recognize how to fix your unit safely and effectively. Get an expert to change the filter and check out your system every year, ideally in the fall. As a property owner, you could change the filter on your own, in between professional visits. If you keep your system clean and serviced, it should operate well for years.  Check this out.